Front Lower Wishbone / Suspension Arm LH/NS • MX-5 MK3/NC (06-15)

MazSpec Aftermarket MSC0005 Left Front Lower Suspension Arm / Wishbone

Replacement left-hand front lower suspension arm / wishbone for Mazda MX-5 Mk3 / Mk3.5 / Mk3.75 (NC) 1.8L and 2.0L models listed in the compatibility table.

The front lower suspension arm is a key part of the MX-5 NC front suspension assembly. It helps locate the lower section of the front hub / steering knuckle, supports wheel control, and works with the upper arm, shock absorber, anti-roll bar link and steering components to maintain suspension geometry.

There is typically one left-hand front lower suspension arm fitted per vehicle. This listing is for the left-hand / LH front lower arm only.

This part is commonly replaced when the original arm is bent, corroded, accident-damaged, has worn bushes, has play in the ball joint, or is unsuitable for reuse during front suspension refurbishment, wheel alignment repair or MOT repair work.

• Part type: Front lower suspension arm / lower control arm / wishbone
• Primary use: Front suspension geometry and wheel location
• Location: Front suspension
• Position: Left-hand front / LH
• Quantity per vehicle: 1 left-hand front lower arm
• Quantity supplied: 1
• Brand: MazSpec Aftermarket
• Part No.: MSC0005
• Also referenced as: NE5134350D
• Supersedes / replaces: NE51-34-350B / NE51-34-350C
• Fitment note: Listed for Mazda MX-5 NC front suspension applications
• Included component note: Dealer catalogue data describes this as including ball joint and bushings

Fitment advice: Designed for the Mazda MX-5 NC variants listed in the compatibility table. This is the left-hand front lower suspension arm and should not be fitted to the right-hand side. For imported, modified or previously repaired cars, matching the original arm position and part number is recommended before fitting.

Other items to consider: When changing this part, you may also want to consider purchasing related front suspension items such as the opposite-side lower arm, front upper suspension arms, hub / steering knuckle bolts, anti-roll bar links, shock absorber fixings, alignment hardware and any corroded or damaged suspension nuts and bolts found during removal.

Useful tools / consumables: Jack and axle stands or vehicle lift, socket set, breaker bar, torque wrench, ball joint separator, penetrating oil, wire brush, anti-seize compound where appropriate and suitable wheel alignment equipment after installation.

Difficulty guide: DIY Difficulty: Advanced. Replacement normally involves raising and safely supporting the vehicle, separating suspension joints, removing seized or corroded fixings and re-torquing suspension components correctly. A wheel alignment should be carried out after suspension arm replacement.

Why MazSpec Aftermarket? The customer is at the centre of everything we do. When it comes to our own sourced in house products, quality and customer piece of mind are out number one priority.

All our vendors are vetted to the highest standards and are ISO and IATF certified to ensure quality in every component. We have called upon our years of engineering experience in the automotive industry to make sure all components are manufacture to the exact same specification and tolerances as the original product and will not be beaten by an inferior brand. 

At MazSpec, we know what matters to our customers when it comes to parts. We are able to supply the precision, durability and cutting-edge technology customers want.

What’s in the box: One Genuine Mazda left-hand front lower suspension arm / wishbone assembly. Additional bolts, nuts, alignment hardware and other suspension components are not included unless listed separately.

Installation notes: Inspect the surrounding suspension arms, ball joints, bushes, hub / knuckle, shock absorber fixings and anti-roll bar links during installation. Replace any worn or corroded related components, torque all fasteners to Mazda workshop manual specification and complete a wheel alignment before regular road use.