Quinton Hazell XIC8399 Ignition Coil Pack
Replacement Quinton Hazell ignition coil for Mazda MX-5 MK3/NC and MK3.5/3.75 NC 2.0 and 2.0 Sport petrol models.
The ignition coil converts the vehicle's low-voltage electrical supply into the high voltage required to fire the spark plug. XIC8399 is designed as an aftermarket replacement for the original coil-on-plug unit fitted to the compatible 2.0-litre applications listed.
A failing ignition coil may cause misfires, rough running, hesitation, poor starting, reduced performance, increased fuel consumption or an illuminated engine-management warning light.
- Part type: Ignition coil / coil pack
- Ignition type: Coil-on-plug
- Electrical connector: 3-pin
- Number of outputs: 1
- Length: 215 mm
- Width: 66 mm
- Height: 78 mm
- Engine compatibility: 2.0 petrol
- Quantity per vehicle: 4
- Quantity supplied: 1 ignition coil
- Brand: Quinton Hazell
- Part No.: XIC8399
- EAN: 5022515143886
- Designed as an aftermarket replacement for the original component on the applications listed
Fitment advice: XIC8399 is catalogued for the Mazda MX-5 NC 2.0 engine only. Four coils are fitted per engine and this listing supplies one coil. The 1.8-litre NC uses a different ignition coil and should not be allocated to this part.
Other items to consider: Spark plugs, engine air filter and other ignition coils where age or mileage suggests multiple units may be deteriorating.
Useful tools / consumables: Socket set, suitable spark-plug socket, dielectric grease where appropriate and a diagnostic scan tool if investigating a misfire.
Difficulty guide: DIY Difficulty: Easy to Moderate. The coil is mounted directly above the spark plug and can normally be replaced with basic hand tools.
Why Quinton Hazell? Quinton Hazell is a long-established automotive aftermarket brand, offering dependable replacement parts for servicing and repair. Its components are designed as practical aftermarket replacements for the original parts on the applications listed.
What’s in the box: 1 × Quinton Hazell XIC8399 ignition coil pack.
Installation notes: Switch the ignition off before disconnecting the electrical connector. Remove the retaining fastener, withdraw the old coil carefully and inspect the spark-plug well for oil or moisture contamination. Install the replacement fully onto the spark plug and reconnect the electrical plug securely.
| Make | Model | Sub Variant | Chassis / Code | Years | Power (PS) | Engine Codes | Fuel | Transmission | Notes |
|---|---|---|---|---|---|---|---|---|---|
| Mazda | MX-5 MK3 / NC | 2.0 | NC18 | 2005-2009 | 160 | LFG7 / LFG8 / LFY7 / LFZD | Petrol | Manual | Ignition coil; 4 required per engine; includes compatible 6-speed Sport |
| Mazda | MX-5 MK3.5 / 3.75 / NC | 2.0 | NC18 | 2009-2014 | 160 | LFG7 / LFG8 / LFY7 / LFZD | Petrol | Manual | Ignition coil; 4 required per engine; includes compatible 6-speed Sport |
| Vehicle Manufacturer | OEM Reference Number |
|---|---|
| Mazda | L3G2-18-100A |
| Mazda | L3G2-18-100A-9U |
| Mazda | L3G2-18-100B |
| Mazda | L3G2-18-100B-9U |