Genuine Mazda Pop-Up Headlamp Pod Vessel / Bezel – LH • NA01-50-751

Genuine Mazda Pop-Up Headlamp Pod Vessel / Bezel – Left Hand

Replacement Genuine Mazda left-hand headlamp pod vessel for all Mazda MX-5 Mk1 NA models equipped with the factory pop-up headlamp system.

The vessel is the black internal surround fitted within the raised left-hand pop-up headlamp assembly. It sits around the headlamp unit and forms the visible internal finish of the pod when the headlamp is raised.

This component is separate from the painted exterior headlamp lid, headlamp unit, lamp retaining ring, adjustment hardware, lifting mechanism and electric retractor motor.

One left-hand vessel is fitted per vehicle, and this listing supplies one Genuine Mazda component. The corresponding right-hand vessel is supplied separately under Mazda reference NA01-50-741.

Side identification: Left hand refers to the vehicle’s left side when seated in the vehicle facing forwards. On a UK right-hand-drive MX-5, this is the nearside or passenger side.

• Part type: Pop-up headlamp pod vessel / bezel
• Common names: Headlamp surround / headlight bucket bezel / headlamp pod insert
• Mazda catalogue description: Vessel (L), Head Lamp
• Fitting position: Front left
• UK position: Nearside / passenger side
• Installation location: Inside the left-hand pop-up headlamp pod
• Finish: Black
• Function: Surrounds the headlamp unit and finishes the inside of the raised pod
• Quantity fitted per vehicle: 1 left-hand vessel
• Quantity supplied: 1 vessel
• Right-hand vessel included: No
• Headlamp unit included: No
• Painted headlamp lid included: No
• Retaining ring included: No
• Retractor motor or lifting mechanism included: No
• Mounting hardware included: No
• Brand: Genuine Mazda
• Part No.: NA01-50-751
• Matching right-hand reference: NA01-50-741
• MX-5 fitment: All Mk1 NA models with factory pop-up headlamps

Typical reasons for replacement:

• Original vessel cracked or broken
• Mounting points damaged
• Component distorted following front-end impact
• Black finish faded or heavily deteriorated
• Original surround missing following headlamp repairs
• Damage caused during removal of the headlamp unit
• Headlamp pod being restored or rebuilt
• Incorrect or modified component previously installed

Fitment advice: NA01-50-751 is the left-hand vessel used with the original Mk1 NA pop-up headlamp arrangement. Confirm the required side before ordering, as the right-hand component has a different Mazda reference.

Replacement advice: Inspect the lamp retaining ring, adjuster hardware, painted headlamp lid, lifting rod, hinges and retractor mechanism while the pod is dismantled. A replacement vessel will not correct a bent headlamp frame or malfunctioning lifting mechanism.

Alignment advice: After installation, confirm that the headlamp raises and lowers without the vessel contacting the painted lid or surrounding bodywork. Check the headlamp aim whenever the lamp unit or adjustment hardware has been disturbed.

Electrical safety: Isolate the headlamp retractor system before working inside an open pop-up headlamp assembly. The lifting mechanism can move unexpectedly if it remains energised.

Other items to inspect: Check the matching vessel on the opposite side, lamp retaining rings, adjustment screws, electrical connectors, retractor linkages, protective boots and painted headlamp lids.

Useful tools / consumables: Cross-head and flat-blade screwdrivers, small socket set, plastic trim tools, penetrating fluid for corroded hardware and suitable electrical-contact cleaner where required.

Difficulty guide: DIY Difficulty: Easy to Moderate. Installation requires access inside the raised headlamp pod and careful removal of the lamp and retaining components.

Why Genuine Mazda? Genuine Mazda headlamp vessels match the original pod shape, mounting positions, lamp clearance and finish. Correct dimensions help preserve normal headlamp movement and the original appearance of the raised pop-up lamp assembly.

What’s in the box: One Genuine Mazda left-hand pop-up headlamp pod vessel / bezel, part number NA01-50-751.

Installation notes: Raise the headlamps and isolate the retractor system before dismantling the pod. Remove the headlamp unit and associated retaining components as required, noting their original positions. Transfer any reusable hardware to the replacement vessel, then install it without forcing or distorting the mounting points. Refit the lamp assembly, confirm clearance throughout the complete raising and lowering cycle and check the headlamp aim before road use.