Genuine Mazda Pop-Up Headlamp Pod Vessel / Bezel – RH • NA01-50-741

Genuine Mazda Pop-Up Headlamp Pod Vessel / Bezel – Right Hand

Replacement Genuine Mazda right-hand headlamp pod vessel for all Mazda MX-5 Mk1 NA models equipped with factory pop-up headlights.

The vessel is the black surround fitted within the raised right-hand pop-up headlamp assembly. It sits around the lamp unit and forms the visible internal finish of the headlamp pod when the lights are raised.

This component is separate from the painted exterior headlamp lid, sealed-beam or headlamp unit, retaining ring, lifting mechanism and electric retractor motor.

One right-hand vessel is fitted per vehicle, and this listing supplies one Genuine Mazda component. The matching left-hand vessel is supplied separately under Mazda reference NA01-50-751.

Side identification: Right hand refers to the vehicle’s right side when seated in the vehicle facing forwards. On a UK right-hand-drive MX-5, this is the offside or driver’s side.

• Part type: Pop-up headlamp pod vessel / bezel
• Common names: Headlamp surround / headlight bucket bezel / headlamp pod insert
• Mazda catalogue description: Vessel (R), Head Lamp
• Fitting position: Front right
• UK position: Offside / driver’s side
• Installation location: Inside the right-hand pop-up headlamp pod
• Finish: Black
• Function: Surrounds the lamp unit and finishes the inside of the raised headlamp pod
• Quantity fitted per vehicle: 1 right-hand vessel
• Quantity supplied: 1 vessel
• Left-hand vessel included: No
• Headlamp unit included: No
• Painted headlamp lid included: No
• Retaining ring included: No
• Retractor motor or mechanism included: No
• Mounting hardware included: No
• Brand: Genuine Mazda
• Part No.: NA01-50-741
• Matching left-hand reference: NA01-50-751
• MX-5 fitment: All Mk1 NA models with factory pop-up headlights

Typical reasons for replacement:

• Original vessel cracked or broken
• Mounting points damaged
• Component distorted following front-end impact
• Black finish faded or heavily deteriorated
• Original surround missing following headlamp repairs
• Damage caused during removal of the lamp unit
• Headlamp pod being restored or rebuilt
• Incorrect or modified component previously installed

Fitment advice: NA01-50-741 is the right-hand vessel used with the original Mk1 NA pop-up headlamp arrangement. Confirm the required side before ordering, as the left-hand component has a different Mazda reference.

Replacement advice: Inspect the lamp retaining ring, adjuster hardware, headlamp lid, lifting rod, hinge assembly and retractor mechanism while the pod is dismantled. A replacement vessel will not correct a bent headlamp frame or malfunctioning retractor mechanism.

Alignment advice: After installation, confirm that the headlamp raises and lowers without the vessel contacting the painted lid or surrounding bodywork. Check headlamp aim whenever the lamp unit or its adjustment hardware has been disturbed.

Electrical safety: Isolate the headlamp retractor system before working inside an open pop-up headlamp assembly. The mechanism can move unexpectedly if it remains energised.

Other items to inspect: Check the matching vessel on the opposite side, lamp retaining rings, adjustment screws, headlamp connectors, retractor linkages, rubber boots and painted headlamp lids.

Useful tools / consumables: Cross-head and flat-blade screwdrivers, small socket set, plastic trim tools, penetrating fluid for corroded hardware and suitable electrical-contact cleaner where required.

Difficulty guide: DIY Difficulty: Easy to Moderate. Installation requires access inside the raised headlamp pod and careful removal of the lamp and retaining components.

Why Genuine Mazda? Genuine Mazda headlamp vessels match the original pod shape, mounting positions, lamp clearance and black finish. Correct dimensions help retain normal headlamp movement and the original appearance of the raised pop-up lamp assembly.

What’s in the box: One Genuine Mazda right-hand pop-up headlamp pod vessel / bezel, part number NA01-50-741.

Installation notes: Raise the headlamps and isolate the retractor system before dismantling the pod. Remove the lamp unit and associated retaining components as required, noting their original positions. Transfer any reusable hardware to the replacement vessel, then install it without forcing or distorting the mounting points. Refit the lamp assembly, confirm clearance throughout the complete raising and lowering cycle and check the headlamp aim before road use.