Genuine Mazda Engine Air Filter – MX-5 Mk4 / ND & RF • PEES-13-3A0

Genuine Mazda PEES-13-3A0 Engine Air Filter

Replacement Genuine Mazda engine air-filter element for Mazda MX-5 Mk4 / ND and RF models with applicable 1.5L and 2.0L SKYACTIV-G petrol engines listed in the compatibility table.

The rectangular filter fits inside the engine air-cleaner housing and removes dust, grit, pollen and other airborne contamination from the intake air.

Correct filtration helps prevent abrasive debris from reaching the airflow sensor, throttle body, inlet manifold and internal engine components.

As contamination accumulates within the filter media, airflow may become restricted. A heavily soiled filter can contribute to reduced throttle response, poor performance, increased fuel consumption or unusual intake noise.

This listing supplies one Genuine Mazda engine air-filter element, which is the quantity required per applicable vehicle.

• Part type: Engine air-filter element
• Mazda catalogue description: Element, air cleaner
• Alternative descriptions: Engine air filter / intake filter / air-cleaner element
• Mazda diagram position: 133A0A
• Primary function: Removes airborne contamination from engine intake air
• System: Engine air-intake system
• Fitting position: Inside the engine air-cleaner housing
• Primary vehicle application: Mazda MX-5 Mk4 / ND and RF
• Engine applications: Applicable 1.5L and 2.0L SKYACTIV-G petrol engines
• Transmission applications: Manual and automatic according to vehicle specification
• Filter type: Rectangular replaceable panel element
• Approximate length: 344 mm
• Approximate width: 144–145 mm
• Approximate height: 42 mm
• Quantity required per vehicle: One
• Quantity supplied: One air-filter element
• Brand: Genuine Mazda
• Part No.: PEES-13-3A0
• Also referenced as: PEES133A0
• Mazda service format: PEES-13-3A0-9A
• Associated Mazda reference: P51N-13-3A0A

Typical reasons for replacement:

• Routine engine service
• Filter media visibly contaminated by dust or debris
• Filter element wet, oily or damaged
• Reduced engine response or restricted intake airflow
• Unusual intake noise
• Air-cleaner housing opened during intake-system repairs
• Vehicle operated in dusty or heavily polluted conditions
• Unknown filter age or service history

Fitment advice: This filter is used in the standard engine air-cleaner housing fitted to applicable Mazda MX-5 ND and RF 1.5L and 2.0L petrol models.

Reference advice: PEES-13-3A0-9A is the Mazda service-pack presentation of the supplied filter. P51N-13-3A0A is also associated with the same filter dimensions in Mazda replacement catalogues, but should not be treated as a confirmed one-directional supersession without application-specific catalogue confirmation.

Service advice: Inspect the filter at each routine service and replace it at the interval specified for the vehicle and operating conditions. More frequent replacement may be appropriate where the vehicle is regularly used in dusty environments.

Inspection advice: Hold the removed filter in good light and inspect the full depth of the pleated media. Replace it if it is heavily discoloured, blocked, torn, distorted, wet or contaminated by oil.

Air-box advice: Clean loose leaves, grit and debris from the lower air-cleaner housing before fitting the replacement filter. Do not allow contamination to enter the clean side of the intake system.

Sealing advice: Confirm that the filter perimeter seal sits evenly within the air-cleaner housing. A folded or incorrectly positioned seal can allow unfiltered air to bypass the filter element.

Housing advice: Inspect the air-cleaner housing, retaining clips, intake ducting and hose clamps for cracks, damage or loose connections.

Sensor advice: Avoid touching or contaminating the airflow sensor while servicing the air cleaner. Intake-system faults or airflow-sensor contamination can produce symptoms similar to a restricted filter.

Cleaning advice: This is a replaceable paper-type filter element. Do not wash it, soak it in cleaning fluid or apply filter oil unless specifically instructed for a different reusable-filter design.

Diagnostic advice: Reduced performance or increased fuel consumption can have several causes. Check the intake ducting, airflow sensor, throttle body, ignition system and fuel system where symptoms remain after filter replacement.

Other items to consider: Consider inspecting the air-cleaner housing clips, intake hose, breather hoses and cabin filter during the same service.

Useful tools / consumables: Basic hand tools where required, vacuum cleaner or clean lint-free cloth for the air box and an inspection lamp.

Difficulty guide: DIY Difficulty: Easy. Replacement normally requires opening the air-cleaner housing, removing the old element and fitting the new filter in the correct orientation.

Why Genuine Mazda? Genuine Mazda air filters are specified for the original housing dimensions, sealing arrangement, airflow requirements and filtration performance. Using the correct OE element helps prevent unfiltered air from bypassing the filter and maintains compatibility with the standard intake system.

What’s in the box: One Genuine Mazda engine air-filter element, part number PEES-13-3A0. Air-cleaner housing, clips, intake ducting and installation tools are not included unless specifically shown or stated separately.

Installation notes: Switch off the engine and allow it to cool. Release the air-cleaner housing clips or fasteners, lift the cover carefully and remove the old filter. Clean loose debris from the lower housing without allowing contamination into the clean intake passage. Fit the replacement element in the correct orientation, confirm that its perimeter seal is fully seated and close the housing securely. Check that all clips, intake hoses and electrical connections are properly fitted before starting the engine.