Genuine Mazda Clutch Pedal Assembly RHD • N121-41-300B

Genuine Mazda N121-41-300B Clutch Pedal Assembly

Replacement Genuine Mazda clutch pedal assembly for right-hand-drive Mazda MX-5 Mk3, Mk3.5 and Mk3.75 / NC manual-transmission models listed in the compatibility table.

The clutch pedal transfers the driver’s foot movement to the clutch master-cylinder pushrod, allowing the clutch to disengage and engage as the pedal is pressed and released. The assembly also provides the correct mounting points and geometry for the pedal pivot, return mechanism and associated clutch controls.

The assembly is mounted beneath the dashboard on the driver’s side of right-hand-drive vehicles. There is one clutch pedal assembly fitted per manual-transmission vehicle. This listing supplies one Genuine Mazda clutch pedal assembly.

Replacement may be required where the original pedal assembly has cracked around its welded sections or mounting points, developed excessive movement at the pivot, become distorted or started producing creaking, clicking or grinding noises. Typical symptoms can also include an inconsistent pedal action, restricted pedal travel or difficulty operating the clutch smoothly.

• Part type: Clutch pedal assembly
• Primary use: Transfers pedal movement to the clutch hydraulic system
• Location: Driver’s footwell beneath the dashboard
• Position: Right-hand-drive driver’s side
• Vehicle type: Manual transmission only
• Quantity per vehicle: 1
• Quantity supplied: 1 clutch pedal assembly
• Brand: Genuine Mazda
• Part No.: N121-41-300B
• Also referenced as: N12141300B
• Fitment note: For right-hand-drive Mazda MX-5 NC manual-transmission models listed in the compatibility table

Fitment advice: This assembly is intended for right-hand-drive manual-transmission vehicles. Inspect the clutch master-cylinder pushrod, clevis pin, retaining clip, pedal bushes, switches and surrounding mounting points while the original assembly is removed. For imported, modified or previously repaired cars, matching the original pedal orientation, mounting arrangement and part number is recommended.

Other items to consider: When changing this part, you may also want to consider purchasing pedal bushes, pivot components, clevis pin and retaining clip, clutch pedal switch, clutch master cylinder, clutch fluid and replacement mounting fasteners where the originals are worn, corroded or damaged.

Useful tools / consumables: Socket set, ratchet extensions, spanners, pliers, trim-removal tools, work light, torque wrench and a suitable lubricant for the specified pedal pivot points.

Difficulty guide: DIY Difficulty: Moderate. Access beneath the dashboard is restricted, and the pedal must be disconnected carefully from the clutch master-cylinder pushrod, switches and mounting bracket. Correct adjustment and secure refitting of all retaining components are essential for reliable clutch operation.

Why Genuine Mazda? Genuine Mazda clutch components are designed to match the original pedal geometry, mounting points, pivot arrangement and clutch master-cylinder connection. Correct material quality and dimensional accuracy help maintain the intended pedal travel, driver control and compatibility with the surrounding clutch hydraulic system.

What’s in the box: One Genuine Mazda right-hand-drive clutch pedal assembly.

Installation notes: Disconnect the vehicle battery where required before working around dashboard wiring and pedal switches. Record the position of the switches and master-cylinder pushrod before removal. Transfer or replace associated bushes, pins, clips and switches as necessary, tighten all mounting fasteners to Mazda’s specified torque and confirm that the pedal moves freely through its full travel. Check clutch operation and switch adjustment before driving the vehicle.