Genuine Mazda Front Wheel Stud / Hub Bolt • F151-33-062

Genuine Mazda F151-33-062 Front Wheel Stud / Hub Bolt

Replacement Genuine Mazda front wheel stud for Mazda MX-5 Mk3, Mk3.5 and Mk3.75 / NC models and selected Mazda RX-8 front hub applications listed in the compatibility table.

The wheel stud, also referred to as a hub bolt or wheel lug stud, is pressed into the front wheel hub and provides the threaded mounting point for the wheel nut. Correctly fitted wheel studs securely clamp the road wheel against the hub assembly.

This listing is for one Genuine Mazda front wheel stud. The same part is used on the front left or front right. Multiple studs are fitted to each front hub, so establish the total quantity required before ordering.

Replacement may be required where the original stud has damaged or stripped threads, excessive corrosion, visible stretching, impact damage or a broken shank. Wheel-stud damage can result from cross-threading, overtightening, loose wheel nuts or incorrect use of an impact wrench.

• Part type: Front wheel stud / hub bolt / wheel lug stud
• Primary use: Provides the threaded fixing point for the wheel nut
• Location: Front wheel hub assembly
• Position: Front left or front right
• Quantity per vehicle: Multiple studs are fitted to each front hub
• Quantity supplied: One wheel stud
• Brand: Genuine Mazda
• Part No.: F151-33-062
• Also referenced as: F15133062
• Fitment note: Confirmed for the front hub applications shown in the compatibility table; not listed here as a rear wheel stud

Fitment advice: Match the original wheel stud diameter, spline arrangement, thread and fitted position before installation. Inspect the hub mounting hole and wheel nut for damage. For imported, modified or previously repaired cars, matching the original part number and hub arrangement is recommended.

Other items to consider: When changing this part, you may also want to consider purchasing a replacement wheel nut, additional wheel studs where more than one is damaged, front wheel-bearing or hub components, brake-disc retaining hardware and any corroded wheel or brake fixings disturbed during the repair.

Useful tools / consumables: Vehicle lift or jack and axle stands, wheel-nut socket, suitable hammer and drift or workshop press, stud installation tool, torque wrench, penetrating fluid, wire brush and brake cleaner.

Difficulty guide: DIY Difficulty: Moderate. Access normally requires removal of the wheel and may require removal or repositioning of brake components. The damaged stud must be removed without harming the hub or wheel bearing, and the replacement must be drawn or pressed fully into position.

Why Genuine Mazda? Genuine Mazda wheel studs are manufactured to the original thread, spline, length, material and strength specification. Using the correct OE stud helps ensure secure engagement with the hub and wheel nut, correct wheel clamping and compatibility with the original Mazda wheel and hub assembly.

What’s in the box: One Genuine Mazda front wheel stud / hub bolt, part number F151-33-062. Wheel nut and other installation hardware are not included unless listed separately.

Installation notes: Support the vehicle safely and remove the wheel. Protect the wheel bearing and surrounding brake components while removing the damaged stud. Align the replacement stud splines with the hub, seat it fully and avoid damaging the threads. Refit the wheel and tighten the wheel nut progressively to the applicable Mazda torque specification. Recheck wheel-nut torque after the recommended settling period.