Genuine Mazda Front Brake Caliper Support Bracket / Carrier • NF47-33-281

Genuine Mazda NF47-33-281 Front Brake Caliper Support Bracket / Carrier

Replacement Genuine Mazda front brake caliper support bracket for Mazda MX-5 Mk3, Mk3.5 and Mk3.75 / NC models from 2005 to 2015 listed in the compatibility table.

The brake caliper support bracket, also known as the caliper carrier or caliper mounting bracket, bolts to the front suspension upright. It supports the sliding brake caliper, positions the brake pads correctly around the disc and provides the mounting points for the caliper guide pins.

This listing is for one Genuine Mazda front caliper support bracket. The same part is used on the front left or front right, with two normally fitted per vehicle.

Replacement may be required where the original bracket is heavily corroded, cracked, distorted or has damaged mounting threads, guide-pin locations or brake-pad support surfaces. A damaged or seized carrier can contribute to restricted caliper movement, uneven brake-pad wear, unwanted brake noise or difficulty mounting the caliper securely.

• Part type: Front brake caliper support bracket / caliper carrier
• Primary use: Supports and locates the front brake caliper and brake pads
• Location: Front suspension upright and brake assembly
• Position: Front left or front right
• Quantity per vehicle: Two
• Quantity supplied: One caliper support bracket
• Brand: Genuine Mazda
• Part No.: NF47-33-281
• Also referenced as: NF4733281
• Fitment note: The same bracket is used on either front side of the confirmed Mazda MX-5 NC applications

Fitment advice: Match the original caliper carrier and front brake arrangement before installation. Inspect the caliper guide pins, boots, mounting threads and brake-pad contact surfaces while the assembly is dismantled. For imported, modified or previously repaired cars, matching the original part number and brake component style is recommended.

Other items to consider: When changing this part, you may also want to consider purchasing caliper guide pins, guide-pin boots, pad fitting hardware, front brake pads, brake discs, caliper mounting bolts and any other corroded or damaged brake fixings.

Useful tools / consumables: Jack and axle stands or vehicle lift, wheel-nut socket, suitable socket and spanner set, torque wrench, brake cleaner, wire brush, penetrating fluid and brake-compatible guide-pin lubricant where specified.

Difficulty guide: DIY Difficulty: Moderate. The wheel and brake caliper must be removed, and the brake hose must not be strained while the caliper is supported. All carrier and caliper fasteners must be tightened correctly before the vehicle is returned to use.

Why Genuine Mazda? Genuine Mazda brake components are manufactured to match the original mounting points, guide-pin alignment, brake-pad position and caliper-to-disc relationship. Using the correct OE carrier helps maintain proper caliper movement, pad and disc alignment, secure installation and compatibility with the original Mazda braking system.

What’s in the box: One Genuine Mazda front brake caliper support bracket / carrier, part number NF47-33-281. Brake caliper, guide pins, boots, brake pads, fitting hardware and mounting bolts are not included unless listed separately.

Installation notes: Support the brake caliper without allowing it to hang from the flexible hose. Clean the upright mounting face and inspect all threads before assembly. Ensure the guide pins move freely, position the pads and caliper correctly, and tighten the bracket and caliper fasteners to the applicable Mazda workshop specification. Confirm normal brake operation before road use.