Genuine Mazda Handbrake Leather Gaiter & Mounting Frame • NE51-64-43YA

Genuine Mazda NE51-64-43YA Handbrake Leather Gaiter & Mounting Frame

Replacement Genuine Mazda handbrake gaiter assembly for Mazda MX-5 Mk3 NC1 pre-facelift models produced from 2005 to 2009.

The gaiter surrounds the handbrake lever where it passes through the centre console. It covers the opening around the parking-brake mechanism and provides the original finished appearance within the cabin.

The gaiter is supplied already attached to its moulded plastic mounting frame. The complete assembly clips directly into the centre-console trim, avoiding the need to separate the original gaiter from its potentially brittle plastic fittings.

Age, repeated handbrake use and interior heat can cause the original material to crack, peel, split or pull away from its stitching. The plastic retaining clips can also become brittle or damaged during console removal.

One handbrake gaiter assembly is fitted per vehicle, and this listing supplies one complete Genuine Mazda gaiter and mounting frame.

Fitment restriction: This is the pre-facelift version for the original Mk3 NC1 centre console. It does not replace the later Mk3.5 or Mk3.75 facelift assembly, which uses Mazda part number NH52-64-43Y.

• Part type: Handbrake gaiter assembly
• Common names: Parking-brake boot / handbrake leather gaiter
• Location: Centre console around the handbrake lever
• Function: Covers the handbrake mechanism opening and finishes the centre console
• Gaiter included: Yes
• Plastic mounting frame included: Yes
• Handbrake lever included: No
• Centre-console trim included: No
• Quantity fitted per vehicle: 1
• Quantity supplied: 1 complete assembly
• Brand: Genuine Mazda
• Part No.: NE51-64-43YA
• MX-5 fitment: Mk3 NC1 pre-facelift models

Typical reasons for replacement:

• Gaiter material cracked or peeling
• Material torn or split
• Stitching damaged or separated
• Gaiter discoloured or heavily worn
• Material detached from the mounting frame
• Plastic retaining clips broken
• Original frame damaged during console removal
• Interior refurbishment

Fitment advice: This assembly fits the pre-facelift centre-console arrangement used on the original MX-5 Mk3 NC1. The later Mk3.5 and Mk3.75 gaiter uses a different mounting assembly and should not be substituted.

Other items to consider: Inspect the handbrake grip, centre-console trim, console retaining clips, storage-compartment lid and surrounding trim panels. Consider purchasing replacement clips where the originals are brittle or damaged.

Useful tools / consumables: Plastic interior-trim tools, a small screwdriver and protective masking tape for nearby console surfaces.

Difficulty guide: DIY Difficulty: Easy. The complete assembly clips into the centre console, although care is required to avoid marking the surrounding trim or breaking its retaining clips.

Why Genuine Mazda? Genuine Mazda interior trim components match the original mounting-frame dimensions, retaining-clip positions, gaiter shape and console opening. The complete assembly provides a factory-style fit without modifying or transferring the original frame.

What’s in the box: One Genuine Mazda handbrake gaiter and mounting-frame assembly, part number NE51-64-43YA.

Installation notes: Release the handbrake and remove or lift the surrounding console components as required for access. Use a plastic trim tool to release the original gaiter frame evenly without forcing individual clips. Slide the old gaiter over the handbrake lever, then position the replacement assembly with its seam and folds correctly aligned. Press the mounting frame evenly into the console until every retaining clip is fully engaged. Operate the handbrake through its full travel and confirm that the gaiter does not twist, pull free or obstruct the lever.