Pipercross Viper Air Intake System – MX-5 Mk1 / NA 1.6 • VF108

For Mazda MX-5 Mk1 / NA 1.6 16V naturally aspirated models from approximately 05/1990 to 05/1998; specifically for the 1.6-litre engine and not the 1.8.

The Pipercross VF108 is a vehicle-specific Viper performance air intake system designed to replace the original Mazda air cleaner and associated intake arrangement on compatible MX-5 Mk1 / NA 1.6 models.

Rather than simply replacing the filter element inside the original airbox, VF108 provides a complete Pipercross intake solution using a performance foam filter, Viper carbon-fibre housing and vehicle-specific installation components.

Product Specifications

• Brand: Pipercross
• Product range: Viper
• Pipercross part number: VF108
• Product type: Vehicle-specific performance air intake system
• Vehicle application: Mazda MX-5 Mk1 / NA
• Engine application: 1.6 16V naturally aspirated
• Filter type: Long-life performance filter
• Filter media: Performance foam
• Intake housing: Carbon-fibre Viper housing
• Heatshield: Included
• Factory airbox: Replaced by the Viper intake system
• Cold-air feed: No separate cold-air feed supplied for this application
• Quantity supplied: 1 complete intake system

Important Fitment Note

VF108 is specifically the 1.6-litre MX-5 Mk1 / NA Viper application. Different Pipercross systems are used for 1.8-litre models, so VF108 should not be ordered for an MX-5 Mk1 / NA 1.8.

The vehicle should retain the appropriate standard naturally aspirated 1.6-litre intake and airflow-meter configuration. Modified intake systems, engine conversions or substantially altered engine-bay layouts should be checked carefully before ordering.

Typical Reasons for Replacement / Upgrade

Suitable for owners looking to replace the original Mazda airbox and intake arrangement with a complete vehicle-specific Pipercross system. The Viper kit replaces the standard air-cleaner arrangement rather than functioning as a simple replacement panel filter.

Fitment Advice

Installation requires removal of the original air cleaner and relevant intake components before fitting the Pipercross Viper assembly, heatshield and supplied installation hardware. Check the condition of the surrounding intake hoses, clips and mounting points while the original system is removed.

For imported, modified or previously repaired cars, matching the part number, dimensions and intake specification of the component being replaced is recommended.

Cleaning & Maintenance

The Pipercross foam filter is serviceable and reusable. Pipercross recommends cleaning its filters in accordance with the vehicle manufacturer's normal filter service interval, with more frequent servicing where the vehicle is used in particularly dusty conditions. Use Pipercross Air Filter Cleaner, rinse with warm low-pressure water and allow the filter to dry naturally before refitting. Dirt Retention Additive should only be used where appropriate for the filter and operating conditions.

Other Items to Consider

• Pipercross C9000 Air Filter Cleaning Kit for future servicing
• Replacement intake hose clips or fasteners if the original Mazda components are worn or corroded

Useful Tools / Consumables

• Socket and spanner set
• Screwdrivers for intake clamps and fixings
• Pliers for hose clips where required
• Clean lint-free cloth

Difficulty Guide

Moderate – suitable for a competent DIY mechanic familiar with removing and installing engine intake components.

Why Pipercross?

Pipercross is a British performance air-filtration specialist producing vehicle-specific replacement filters, competition filters and complete intake systems. Its products are developed with a focus on airflow, filtration and serviceability, with application-specific designs ranging from direct-fit factory-airbox filters to complete performance intake systems.

What's in the Box?

• 1 x Pipercross VF108 Viper intake system
• Pipercross performance foam filter
• Carbon-fibre Viper intake / filter housing
• Vehicle-specific heatshield
• Required fittings and gaskets supplied with the kit

Installation Notes

VF108 replaces the original MX-5 Mk1 / NA 1.6 factory airbox and associated intake arrangement. No separate cold-air feed is supplied with this particular application. Reassemble all intake connections securely and check that hoses, clamps and mounting points are correctly seated before starting the engine.