Genuine Mazda Rear Combination Lamp Fastener / Clip • KD53-51-146B

Genuine Mazda KD53-51-146B Rear Combination Lamp Fastener / Clip

Replacement Genuine Mazda rear combination lamp fastener for Mazda MX-5 Mk4 ND and RF models from 2015 onwards listed in the compatibility table.

This plastic fastener forms part of the rear combination lamp mounting arrangement. It helps locate and retain the rear lamp assembly correctly against the surrounding rear body panel.

The fastener is fitted between the rear lamp assembly and the vehicle body. There are typically two fitted per vehicle, with one associated with each rear lamp assembly. This listing is for one Genuine Mazda fastener.

These clips can become brittle, split, distort or remain attached to the lamp or body when a rear light is removed. A damaged or missing fastener can make the lamp difficult to refit securely and may cause unwanted movement or poor panel alignment.

• Part type: Rear combination lamp fastener / retaining clip
• Primary use: Locates and retains the rear lamp assembly
• Location: Rear combination lamp mounting area
• Position: Left-hand or right-hand rear lamp
• Quantity per vehicle: 2
• Quantity supplied: 1 fastener
• Brand: Genuine Mazda
• Part No.: KD53-51-146B
• Also referenced as: KD5351146B
• Supersedes: KD53-51-146A
• Fitment note: Suitable for the rear combination lamps on confirmed Mazda MX-5 Mk4 ND and RF applications

Fitment advice: This fastener can be used on either the left-hand or right-hand rear combination lamp. Two are normally used per vehicle, but this listing supplies one. For imported, modified or previously repaired cars, matching the original fastener style and part number is recommended.

Other items to consider: When changing this part, you may also want to consider purchasing the associated rear lamp seal, mounting nuts, body clips or a second fastener for the opposite rear lamp.

Useful tools / consumables: Plastic trim-removal tools, a suitable socket or spanner for the rear lamp fixings, a magnetic parts tray and a clean microfibre cloth to protect the lamp and bodywork.

Difficulty guide: DIY Difficulty: Easy. Installation normally requires removal of the relevant boot trim and rear lamp assembly. Care should be taken not to lever directly against painted bodywork or place excessive pressure on the lamp housing.

Why Genuine Mazda? Genuine Mazda lamp fittings are designed to match the original body mounting points, lamp housing and factory panel alignment. Using the correct OE fastener helps retain the lamp securely without placing incorrect pressure on the surrounding plastic housing or painted body panel.

What’s in the box: One Genuine Mazda rear combination lamp fastener, part number KD53-51-146B.

Installation notes: Remove the relevant boot trim and rear lamp assembly using the Mazda workshop procedure. Remove any remains of the old fastener, press the replacement into its correct mounting position and refit the lamp carefully. Check that the lamp sits evenly against the body before tightening the mounting hardware.