ABS Rear Right Brake Caliper • 722022

ABS 722022 Rear Right Brake Caliper

Replacement ABS rear right brake caliper for Mazda MX-5 MK3, MK3.5 and MK3.75 / NC 1.8 and 2.0 models listed in the compatibility table.

The brake caliper uses hydraulic pressure to clamp the brake pads against the rear brake disc when the brake pedal is applied, producing the braking force required to slow the vehicle. This rear caliper also incorporates the mechanical parking-brake mechanism and is designed as an aftermarket replacement for the original component.

ABS 722022 is fitted to the rear right side of the vehicle. One caliper is used on this side, with ABS 722021 being the corresponding rear left caliper.

Rear brake calipers are commonly replaced because of piston seizure, sticking slider components, corrosion, hydraulic fluid leakage or problems with the integrated handbrake mechanism. Typical symptoms can include brake drag, uneven rear pad wear, excessive wheel heat, poor parking-brake performance, reduced braking efficiency or the vehicle pulling under braking.

• Part type: Rear brake caliper
• Primary use: Rear service brake and parking-brake operation
• Location: Rear right
• Brake system: NISSIN
• Caliper type: Single-piston rear caliper
• Parking brake: Integrated parking-brake mechanism
• Suitable brake disc thickness: 10 mm
• Mounting bore spacing: 110 mm
• Paired rear left caliper: ABS 722021
• Quantity per vehicle: 1 rear right
• Quantity supplied: 1 brake caliper
• Brand: ABS
• Part No.: 722022
• Designed as an aftermarket replacement for the applications listed in the compatibility table

Fitment advice: ABS 722022 is the rear right brake caliper for the NISSIN braking system used on the Mazda MX-5 NC applications listed below. It is designed for the corresponding 10 mm rear brake disc arrangement. For imported, modified or previously repaired cars, matching the part number or component style on the part being replaced is recommended.

Other items to consider: When replacing a rear brake caliper, consider inspecting the opposite-side caliper, rear brake pads, rear brake discs, slider hardware, flexible brake hose and handbrake cable. Brake pads and discs should normally be replaced as an axle pair where renewal is required.

Useful tools / consumables: Correct-specification brake fluid, brake cleaner, suitable brake grease for slider components, flare-nut spanners, socket set, torque wrench, brake bleeding equipment and suitable equipment for safely supporting the vehicle.

Difficulty guide: DIY Difficulty: Moderate. Replacement requires removal of the rear braking components, disconnection of the hydraulic brake line and parking-brake mechanism, followed by correct bleeding and checking of the brake system.

Why ABS? ABS offers a comprehensive range of replacement automotive parts designed to provide a reliable, cost-effective solution for maintaining and repairing your Mazda MX-5. With a broad selection of components covering key areas of the vehicle, ABS parts are a practical choice for owners looking for dependable aftermarket replacements without the cost associated with genuine manufacturer parts.

What’s in the box: 1 x ABS rear right brake caliper, Part No. 722022.

Installation notes: Inspect the brake hose, pads, disc and mounting hardware before installation. Ensure the parking-brake mechanism operates freely and all hydraulic connections are clean before assembly. Once installed, thoroughly bleed the brake hydraulic system, check for fluid leaks and confirm correct foot-brake and parking-brake operation before driving the vehicle.