Quinton Hazell Engine Oil Filter • QFL0121

Quinton Hazell QFL0121 Engine Oil Filter

Replacement Quinton Hazell spin-on engine oil filter for Mazda MX-5 MK3/NC and MK3.5/3.75 NC 1.8 and 2.0 petrol models listed in the compatibility table.

The engine oil filter removes contaminants and wear particles from the lubricating oil before it circulates through critical engine components. QFL0121 is designed as an aftermarket replacement for the original filter on the applications listed.

Oil filters should normally be replaced whenever the engine oil is changed. A restricted or contaminated filter can reduce filtration efficiency and contribute to accelerated engine wear.

• Part type: Engine oil filter
• Filter type: Spin-on
• Height: 89 mm
• Diameter: 77 mm
• Inner diameter: 70 mm
• Thread: 3/4"-16 UNF
• Quantity per vehicle: 1
• Quantity supplied: 1 oil filter
• Brand: Quinton Hazell
• Part No.: QFL0121
• EAN: 5050438321005
• Designed as an aftermarket replacement for the original part on the applications listed

Fitment advice: QFL0121 is directly catalogued for Mazda MX-5 NC 1.8 and 2.0 petrol engines. For imported, modified or previously repaired cars, matching the part number or filter specification on the component being replaced is recommended.

Other items to consider: Engine oil, sump plug washer, engine air filter and spark plugs when carrying out a full service.

Useful tools / consumables: Suitable engine oil, drain pan, oil-filter removal tool if required, torque wrench and cleaning materials.

Difficulty guide: DIY Difficulty: Easy to Moderate. Correct oil specification, safe vehicle support where required and correct oil level after filling are important.

Why Quinton Hazell? Quinton Hazell is a long-established automotive aftermarket brand, offering dependable replacement parts for servicing and repair. Its components are designed as practical aftermarket replacements for the original parts on the applications listed.

What’s in the box: 1 × Quinton Hazell QFL0121 spin-on engine oil filter.

Installation notes: Drain the engine oil using the correct procedure, remove the old filter and clean the sealing face. Lightly lubricate the new filter seal with clean engine oil before installation. Refill with the correct oil quantity and specification, run the engine, check for leaks and confirm the final oil level.