Brembo Sport HP2 Front Brake Pad Set • 07.B314.60

Front Brembo Sport HP2 brake pad set for early Mazda MX-5 Mk1 / NA 1.6 models using the original Sumitomo front brake system, up to approximately August 1993.

Brembo 07.B314.60 is a complete front axle set of Sport HP2 performance brake pads for the early Mazda MX-5 NA 1.6 front braking system. This is the earlier, shallower pad profile and should not be confused with Brembo 07.B314.06 used on the later front brake application.

Brembo Sport HP2 pads are developed as sport-oriented direct-fit brake pads for road use. They retain compatibility with the appropriate original brake caliper while using a performance-focused friction material intended for more enthusiastic driving.

Product Specifications

• Brand: Brembo
• Product range: Sport HP2
• Brembo part number: 07.B314.60
• Installation position: Front axle
• Brake system: Sumitomo
• Pad width: 110.1 mm
• Pad height: 46.2 mm
• Pad thickness: 14.4 mm
• WVA number: 21552
• Wear indicator: None
• Quantity required per front axle: 1 pad set
• Quantity supplied: 4 brake pads / 1 complete front axle set

Important Fitment Note

This is the early MX-5 Mk1 / NA 1.6 front pad application. Catalogue application data identifies a change at approximately August 1993, after which the later Brembo 07.B314.06 pad profile is used. The two references have different pad heights and should not be treated as interchangeable. For imported, modified or previously repaired cars, matching the part number, dimensions and brake specification of the component being replaced is recommended.

Typical Reasons for Replacement

Brake pads are normally replaced when the friction material is worn, where uneven wear, contamination or heat damage is present, when renewing worn front brake discs, or when changing from a conventional road pad to a sport-oriented friction material.

Fitment Advice

Replace the front brake pads as a complete axle set. Inspect both front discs, caliper pistons, slider components, dust boots and pad contact surfaces before installation. Particular care should be taken to identify the early 46.2 mm-high pad profile before ordering.

Other Items to Consider

• Front brake discs
• Front brake pad fitting hardware where worn or corroded
• Brake fluid
• Front brake caliper service components where required

Useful Tools / Consumables

• Brake cleaner
• Suitable brake assembly lubricant for specified contact points
• Brake piston retraction tool
• Torque wrench

Difficulty Guide

Moderate – brake pad replacement is a conventional service operation, but correct brake identification, caliper operation and tightening procedures are essential. Braking-system work should only be undertaken by somebody competent to carry it out safely.

Why Brembo?

Brembo Sport HP2 pads are developed for drivers looking for a sport-oriented direct-fit brake pad for road use. They combine Brembo's braking and friction-material expertise with a pad designed to fit the corresponding original brake system without requiring modification.

What's in the Box?

• 4 x Brembo Sport HP2 front brake pads

Installation Notes

Ensure both front calipers operate freely and both brake discs remain within their service limits before installation. After fitting, operate the brake pedal until firm before moving the vehicle, check the brake-fluid level and follow Brembo's recommended bedding-in procedure.