EuroFlo Exhaust Rubber Mounting Hanger – MX-5 Mk3 NC 1.8 / 2.0 Backbox & Midpipe • EMR045

EuroFlo Exhaust Rubber Mounting Hanger – EMR045

Replacement rubber exhaust mounting hanger for Mazda MX-5 Mk3 / NC, Mk3.5 / NC-FL and Mk3.75 / NC-FL2 1.8 and 2.0 petrol models (2005–2015), suitable for the corresponding rear silencer and centre exhaust section mounting positions.

EuroFlo EMR045 is a flexible rubber exhaust mounting designed to support the vehicle's exhaust system while allowing the controlled movement required during normal engine operation and driving.

The exhaust system is supported beneath the vehicle by a series of metal hanger rods and rubber mounting bushes. These rubber mounts connect the exhaust assembly to the vehicle's mounting points, helping maintain the correct position of the pipework and rear silencer.

As the engine operates, vibrations and movements are transmitted through the exhaust system. Rubber exhaust hangers help isolate these movements from the vehicle body, reducing the transfer of vibration and helping prevent unwanted contact between the exhaust and surrounding components.

Without correctly functioning rubber mounts, the exhaust system may move excessively, causing knocking, rattling or vibration against the underside of the vehicle.

Exhaust mounting rubbers are exposed to heat, road spray, dirt and repeated movement. Over time, the rubber can harden, crack, stretch or split, reducing its ability to support the exhaust correctly.

A damaged exhaust hanger may allow the exhaust to hang lower than intended or move out of alignment, placing additional strain on other mounting points, exhaust joints and connected components.

Replacing worn or damaged mounting rubbers helps restore proper exhaust support and maintain the intended clearance between the exhaust, suspension, underbody and rear bumper.

EuroFlo EMR045 is suitable for the corresponding exhaust mounting points on Mazda MX-5 Mk3 / NC models, covering the NC1, NC2 and NC3 generations.

The Mazda MX-5 NC uses five of these exhaust mounting rubbers across the relevant exhaust assembly: four supporting the rear silencer or backbox and one supporting the centre exhaust section.

Each EuroFlo EMR045 rubber mounting is supplied individually, allowing customers to replace a single damaged hanger or purchase multiple units when renewing the complete set.

The rubber construction provides the flexibility needed for normal exhaust movement while helping hold the system securely in its intended position.

This makes the EMR045 suitable for routine exhaust maintenance, replacement of deteriorated original mounting rubbers and exhaust system removal or installation.

Key Features & Benefits

• Replacement rubber exhaust mounting hanger
• Suitable for Mazda MX-5 Mk3 / NC 1.8 and 2.0 petrol models
• Compatible with NC1, NC2 and NC3 generations
• Suitable for the corresponding rear silencer and centre exhaust mounting points
• Flexible rubber construction
• Helps support and correctly position the exhaust system
• Helps isolate exhaust vibration from the vehicle body
• Allows controlled movement during engine operation and driving
• Helps reduce exhaust knocking, rattling and unwanted movement
• Suitable for replacing split, stretched, hardened or damaged original exhaust rubbers
• Suitable for exhaust servicing and replacement work
• Sold individually for convenient replacement

Product Specifications

• Product type: Exhaust rubber mounting hanger
• Brand: EuroFlo
• Manufacturer Part Number: EMR045
• Material: Rubber / elastomer
• Fitting position: Rear silencer and centre exhaust section mounting points
• Vehicle compatibility: Mazda MX-5 Mk3 / NC, Mk3.5 / NC-FL and Mk3.75 / NC-FL2
• Engine compatibility: 1.8 and 2.0 MZR petrol
• Quantity required per vehicle: 5
• Rear silencer quantity: 4
• Centre exhaust section quantity: 1
• Quantity supplied: 1 exhaust rubber mounting hanger
• Condition: New
• EAN: 5060420184280

Fitment Advice: Suitable for the corresponding exhaust mounting positions on Mazda MX-5 Mk3 / NC models with 1.8 and 2.0 petrol engines. A total of five mounting rubbers are used across the rear silencer and centre exhaust section on the standard exhaust arrangement. Exhaust systems modified with aftermarket components may have different mounting layouts.

Quantity Guide: One mounting rubber is supplied per order. For a complete replacement of the five corresponding mounts on the original exhaust assembly, purchase five units.

Signs of Worn Exhaust Mounting Rubbers: Knocking or rattling beneath the vehicle, excessive movement of the exhaust tailpipes, a sagging rear silencer, visible cracking or splitting of the rubber, or contact between the exhaust and the underside of the vehicle.

Other Items to Consider: Replacement exhaust gaskets, exhaust clamps, exhaust fasteners, rear silencers, centre exhaust sections and additional exhaust mounting rubbers.

Useful Tools / Consumables: Vehicle lifting equipment, axle stands, exhaust hanger removal pliers, suitable rubber-safe assembly lubricant and general workshop hand tools.

Difficulty Guide: Easy to Moderate. Replacement involves safely accessing the underside of the vehicle, supporting the exhaust assembly, removing the worn rubber mounting and installing the replacement hanger.

Why EuroFlo? EuroFlo supplies aftermarket exhaust system components and associated fitting parts for vehicle maintenance and repair. The EMR045 rubber exhaust mounting provides a practical solution for renewing deteriorated exhaust supports and maintaining the correct positioning of the exhaust system on compatible Mazda MX-5 NC models.

What's in the Box: 1x EuroFlo EMR045 Rubber Exhaust Mounting Hanger.

Installation / Service Notes: Allow the exhaust system to cool completely before beginning work. Park the vehicle on a level surface and safely raise and support it using suitable lifting equipment and axle stands. Locate the worn exhaust mounting rubber and inspect the surrounding mounting brackets, metal hanger rods and exhaust sections for corrosion, damage or excessive movement. Support the weight of the exhaust before removing the original rubber mounting to prevent the exhaust assembly from dropping or placing strain on other fittings. Carefully release the worn rubber from its metal hanger rods using an appropriate exhaust hanger removal tool. A small amount of suitable rubber-safe assembly lubricant can help removal and installation. Fit the new EuroFlo EMR045 mounting securely over the corresponding hanger rods, ensuring that the rubber is fully seated and correctly positioned. Inspect the remaining exhaust mounts and replace any that show signs of cracking, stretching or deterioration. Once installed, confirm that the exhaust is correctly supported and that suitable clearance is maintained around the suspension, underbody, heat shields and rear bumper. Check the exhaust for unwanted movement or contact before returning the vehicle to normal use.