Victor Reinz Cylinder Head Bolt Set - MX-5 NC 1.8/2.0 & ND 2.0 - 10 Pce • 14-32207-01

Replacement Victor Reinz cylinder head bolt set for Mazda MX-5 Mk3 / NC 1.8 and 2.0, plus MX-5 Mk4 / ND and RF 2.0 petrol models listed in the compatibility table.

Victor Reinz 14-32207-01 is a complete set of 10 cylinder head bolts used to secure the cylinder head to the engine block and maintain the correct clamping load across the cylinder head gasket.

The bolts use an M10 × 1.25 thread, measure approximately 145 mm long and feature a female Torx drive. They are designed as application-specific replacement cylinder head bolts for the confirmed Mazda engines listed in the compatibility table.

Part details:

• Brand: Victor Reinz
• Product type: Cylinder head bolt set
• Victor Reinz part number: 14-32207-01
• Quantity supplied: 10 bolts
• Quantity required: 1 complete set per engine
• Thread size: M10
• Thread pitch: 1.25 mm
• Bolt length: approximately 145 mm
• Drive type: Female Torx
• Mazda references: LF01-10-135, PEDD-10-135
• EAN: 4026634365595

Common reasons for replacement:

• Cylinder head removal
• Cylinder head gasket replacement
• Cylinder head overhaul or repair
• Engine rebuild or major top-end repair
• Replacement of previously tightened torque-to-yield cylinder head bolts

Fitment advice:
This bolt set is suitable for the confirmed Mazda MX-5 applications shown in the compatibility table, including Mk3 / NC 1.8 and 2.0 engines and Mk4 / ND and RF 2.0 Skyactiv-G engines. It is not suitable for the MX-5 ND 1.5 engine.

For imported, modified or previously repaired cars, matching the part number, bolt dimensions and component specification on the parts being replaced is recommended.

Other items to consider purchasing:

• Cylinder head gasket
• Cylinder head gasket set / top-end gasket set
• Rocker / camshaft cover gasket
• Inlet manifold gasket
• Exhaust manifold gasket
• Engine oil and oil filter
• Coolant

Useful tools / consumables:

• Calibrated torque wrench
• Correct female-Torx-compatible cylinder head bolt tool
• Angle gauge where specified by the workshop procedure
• Gasket-removal and surface-cleaning materials
• Precision straight edge and suitable measuring equipment

Difficulty guide: Advanced. Cylinder-head removal and installation requires careful preparation, correct tightening sequence and adherence to the appropriate Mazda workshop procedure.

Why Victor Reinz?
Victor Reinz is Dana's specialist engine sealing brand, supplying gasket systems and associated cylinder-head service components. Replacing the head bolts alongside cylinder-head or head-gasket work helps ensure the correct clamping load is restored during reassembly.

What's in the box:

• 10 × Victor Reinz cylinder head bolts

Installation notes:
Cylinder-head and engine-block mating surfaces should be inspected for condition and flatness before assembly. These bolts are intended to be installed using the correct Mazda tightening sequence and torque / angle procedure for the specific engine. Do not substitute generic tightening specifications.