V-Maxx 30mm Lowering Spring Kit - Mazda MX-5 Mk4 ND • 35 MA 72

V-Maxx 30mm Lowering Spring Kit - Mazda MX-5 Mk4 ND • 35 MA 72

Suitable for Mazda MX-5 Mk4 / ND Roadster 1.5 and 2.0 models from 2015 onwards.

V-Maxx 35 MA 72 is a complete lowering spring kit designed as an aftermarket suspension upgrade for the Mazda MX-5 ND Roadster. The springs provide an approximate 30mm reduction in ride height at the front and rear, giving the car a lower suspension setup while retaining the existing dampers.

The kit is designed specifically around the Mazda MX-5 ND application and is supplied as a complete set of four springs for the front and rear suspension.

• Brand: V-Maxx
• Manufacturer's part number: 35 MA 72
• Product type: Lowering spring kit
• Vehicle application: Mazda MX-5 Mk4 / ND Roadster
• Engine application: 1.5 and 2.0 petrol
• Approximate front lowering: 30mm
• Approximate rear lowering: 30mm
• Quantity: 4 springs
• Designed for use with the vehicle's existing dampers

Fitment advice: Published lowering figures are approximate. Actual ride height can vary depending on vehicle specification, optional equipment and the condition of the existing suspension components. Adequate tyre, wheel and body clearance should be checked throughout the full suspension travel after installation.

Installation: The vehicle must be safely raised and supported before suspension work is carried out. Suspension fasteners should be tightened using the correct procedures and torque specifications, and bushes should be tightened at normal ride height where required. A full wheel-alignment / geometry check should be carried out after installation.

Other items to consider: Inspect the existing dampers, bump stops, dust covers, top mounts, spring seats and suspension fixings while the suspension is dismantled. Worn components should be replaced as necessary before fitting the new springs.

Useful tools / consumables: Suitable vehicle lifting equipment and axle stands, spring compressors where required, torque wrench, general suspension hand tools and suitable penetrating lubricant.

Difficulty guide: Moderate to Advanced. Installation requires safe vehicle lifting, suspension disassembly, correct spring installation and torque procedures, followed by wheel alignment. Professional installation may be advisable where suitable equipment or suspension experience is not available.

Why V-Maxx? V-Maxx specialises in performance suspension and braking upgrades for enthusiast and performance vehicles. Its suspension range is developed to provide a practical balance between improved chassis control, reduced ride height and road usability, with application-specific kits designed around the vehicle they are intended to fit.

What’s included: Complete set of four V-Maxx lowering springs for the front and rear suspension.

Service notes: Check the condition of the existing dampers and associated suspension components before installation. After fitting, check tyre and body clearance throughout the suspension travel and carry out a full wheel-alignment / geometry check. Headlight aim should also be checked after a significant change in vehicle ride height.