Quinton Hazell Rear Right Brake Hose • BFH5709

Quinton Hazell BFH5709 Rear Right Brake Hose

Replacement Quinton Hazell rear right brake hose for Mazda MX-5 MK1/NA and MK2/NB/NB-FL petrol models listed in the compatibility table.

The flexible brake hose carries hydraulic brake fluid between the fixed brake pipe and the moving rear brake assembly. BFH5709 is designed as an aftermarket replacement for the original component.

This hose is fitted on the rear right side of the vehicle. One hose is required for this position.

Replacement may be required if the original hose is cracked, perished, swollen, leaking or damaged, or if internal deterioration is restricting brake fluid flow.

• Part type: Flexible brake hose
• Primary use: Hydraulic brake fluid transfer
• Location: Rear axle, right side
• Connector type: Banjo
• Published length: Approximately 320 mm
• Quantity per vehicle: 1 rear-right hose
• Quantity supplied: 1
• Brand: Quinton Hazell
• Part No.: BFH5709
• Designed as an aftermarket replacement for the applications listed in the compatibility table

Fitment advice: BFH5709 is catalogued for the Mazda MX-5 NA and NB/NB-FL applications shown in the compatibility table. Ensure the hose is fitted without twisting and follows the original routing.

Other items to consider: Check the opposite rear brake hose, front brake hoses, brake fluid, calipers and brake pipe condition while carrying out the repair.

Useful tools / consumables: Suitable brake fluid, brake bleeding equipment, flare-nut spanners, brake cleaner and a torque wrench.

Difficulty guide: DIY Difficulty: Moderate. Replacement requires opening the hydraulic braking system and correctly bleeding the brakes afterwards.

Why Quinton Hazell? Quinton Hazell is a long-established automotive aftermarket brand, offering dependable replacement parts for servicing and repair. Its components are designed as practical aftermarket replacements for the original parts on the applications listed.

What’s in the box: 1 × Quinton Hazell BFH5709 rear right brake hose.

Installation notes: Install using the original routing and mounting points, ensuring the hose is not twisted, stretched or able to contact moving components. Refill and bleed the braking system after installation and check carefully for fluid leaks.