Genuine Mazda Centre Console / Radio Side Trim – RH • NH52-64-230B

Genuine Mazda NH52-64-230B Centre Console / Radio Side Trim – RH

Replacement Genuine Mazda right-hand centre-console and radio side trim panel for Mazda MX-5 Mk3.5 and Mk3.75 NC facelift models produced from 2009 to 2015.

The panel clips alongside the radio and centre-stack assembly, covering the side of the dashboard console and providing the original finished appearance inside the cabin.

UK position: On right-hand-drive vehicles, this is the right-hand driver-side trim panel. It is the opposite side to the left-hand passenger-side panel, Mazda part number NH52-64-240B.

The original trim can become scratched, scuffed, marked or discoloured through everyday use. Its concealed retaining clips may also crack or break during radio, heater-control or dashboard-trim removal if the panel is pulled away unevenly.

One right-hand panel is fitted per vehicle, and this listing supplies one Genuine Mazda RH centre-console trim panel.

Fitment restriction: This panel fits the facelift centre-console arrangement used on Mk3.5 and Mk3.75 NC models. It is not suitable for the earlier pre-facelift Mk3 NC1 dashboard and centre-stack design.

• Part type: Centre-console / radio side trim panel
• Mazda catalogue description: Wall, Right Side / Side Panel
• Position: Right-hand side of centre stack
• UK right-hand-drive position: Driver side
• Location: Beside the radio and centre-console controls
• Function: Covers and finishes the side of the centre-stack assembly
• Colour: Original Mazda interior finish
• Handed component: Yes – right-hand
• Quantity fitted in this position: 1
• Quantity supplied: 1 trim panel
• Radio or audio unit included: No
• Centre-console assembly included: No
• Separate clips or fixings included: Only where physically supplied with the panel
• Brand: Genuine Mazda
• Part No.: NH52-64-230B
• Earlier Mazda reference: NH52-64-230
• Opposite LH panel reference: NH52-64-240B
• MX-5 fitment: Mk3.5 and Mk3.75 NC facelift models

Typical reasons for replacement:

• Visible scratches or scuff marks
• Surface finish worn or discoloured
• Panel cracked or distorted
• Retaining clips broken
• Damage during radio or dashboard removal
• Interior refurbishment
• Missing original panel

Fitment advice: This is the right-hand trim panel for the facelift MX-5 NC centre stack. On UK right-hand-drive vehicles it is positioned on the driver side. Confirm the required side before ordering, as the opposite panel is a separate component.

Other items to consider: Inspect the opposite centre-console side panel, radio surround, gear-lever trim, handbrake gaiter, centre-console retaining clips and adjacent dashboard panels. Consider purchasing replacement trim clips where the originals are brittle or damaged.

Useful tools / consumables: Plastic interior-trim removal tools, a small screwdriver and protective masking tape for adjacent dashboard surfaces.

Difficulty guide: DIY Difficulty: Easy. The panel is retained by concealed clips, but it should be released and installed evenly to avoid damaging the trim or its mounting points.

Why Genuine Mazda? Genuine Mazda interior panels match the original contour, surface finish, retaining-clip positions and dashboard mounting points. This provides a factory-style fit without trimming, drilling or modifying the centre console.

What’s in the box: One Genuine Mazda right-hand centre-console / radio side trim panel, part number NH52-64-230B.

Installation notes: Protect the surrounding dashboard and console surfaces before removal. Use a plastic trim tool to release the original panel gradually, working between its retaining points rather than pulling from one end. Inspect the mounting clips and dashboard apertures for damage. Align every clip on the replacement panel with its corresponding mounting point, then press the panel evenly into position until it sits flush and securely retained. Confirm that the panel does not interfere with the radio surround, controls or adjoining trim.