Genuine Mazda Front Wheel Stud / Hub Bolt • F151-33-062

Genuine Mazda F151-33-062 Front Wheel Stud / Hub Bolt

Replacement Genuine Mazda front wheel stud / hub bolt for Mazda MX-5 Mk3 / Mk3.5 / Mk3.75 (NC) and selected Mazda RX-8 front hub applications listed in the compatibility table.

This Genuine Mazda wheel stud is pressed into the front hub assembly and provides the threaded fixing point for the wheel nut. It helps secure the road wheel to the hub and is an important safety-critical fixing in the front axle and brake assembly.

Wheel studs are commonly replaced when the threads are damaged, stretched, cross-threaded, corroded, snapped, rounded, or when the stud has been damaged during wheel, brake disc, hub or suspension work. A damaged wheel stud can prevent the wheel nut from tightening correctly and should be replaced before the vehicle is returned to road use.

• Part type: Front wheel stud / wheel bolt / hub bolt
• Primary use: Wheel-to-hub fixing
• Location: Front hub assembly
• Position: Front left or front right
• Quantity supplied: 1
• Brand: Genuine Mazda
• Part No.: F151-33-062
• Also referenced as: F15133062
• Designed for Mazda MX-5 NC and RX-8 front hub applications listed in the compatibility table

Fitment advice: Designed for the front hub applications listed in the compatibility table. This listing is for one individual wheel stud / hub bolt. Multiple studs are fitted per hub, so check how many are required before ordering if replacing more than one damaged stud.

Other items to consider: When changing this part, you may also want to consider purchasing related items such as wheel nuts, front hub and bearing assemblies, brake disc retaining screws, brake discs, brake pads, hub mounting bolts, ABS sensor hardware and any other damaged or corroded fixings found during removal.

Useful tools / consumables: Jack and axle stands or vehicle lift, socket set, breaker bar, torque wrench, penetrating oil, brake cleaner, wire brush, wheel nut socket, suitable press or stud installation tool, and appropriate support for the hub during stud removal and installation.

Difficulty guide: DIY Difficulty: Moderate. The wheel stud itself is a simple component, but replacement may require brake disc removal and careful pressing or drawing-in of the new stud. Avoid damaging the hub, bearing, ABS components or wheel stud splines during installation.

Why Genuine Mazda? Genuine Mazda wheel studs are manufactured to the original specification for correct thread pitch, spline fit, shank length, material strength and wheel nut engagement. Using the correct OE wheel stud helps maintain safe wheel clamping force, correct hub fitment and reliable wheel installation.

What’s in the box: One Genuine Mazda front wheel stud / hub bolt. Wheel nuts, hub assemblies, brake components and additional fixings are not included unless listed separately.

Installation notes: Clean the hub area before installation, support the hub correctly when removing or fitting the stud, and ensure the new stud is fully seated in the hub. Tighten wheel nuts to Mazda workshop manual torque specification and re-check wheel security after installation.