Quinton Hazell 3-Piece Clutch Kit • QKT2909AF

Quinton Hazell QKT2909AF 3-Piece Clutch Kit

Replacement Quinton Hazell clutch kit for Mazda MX-5 MK3/NC and MK3.5/3.75 NC 1.8 and 2.0 petrol models with 5-speed manual transmission, as listed in the compatibility table.

The clutch transfers engine power to the manual gearbox while allowing drive to be disconnected during gear changes and when bringing the vehicle to a stop. QKT2909AF is designed as an aftermarket replacement for the original clutch components on the applications listed.

This is a 3-piece clutch kit containing the clutch friction disc, pressure plate and release bearing. The components are normally replaced together while the gearbox is removed because each is subject to wear during normal clutch operation.

Typical reasons for replacement include clutch slip under acceleration, judder during engagement, an unusually high bite point, difficulty transmitting engine torque or noise from the clutch release bearing.

• Part type: 3-piece clutch kit
• Transmission: 5-speed manual only
• Friction disc outer diameter: 215 mm
• Number of teeth / splines: 22
• Hub profile: 24.3 mm
• Clutch friction disc included: Yes
• Clutch pressure plate included: Yes
• Clutch release bearing included: Yes
• Quantity per vehicle: 1 kit
• Quantity supplied: 1 complete 3-piece clutch kit
• Brand: Quinton Hazell
• Part No.: QKT2909AF
• Designed as an aftermarket replacement for the original components on the applications listed

Fitment advice: QKT2909AF is specifically catalogued for 5-speed manual Mazda MX-5 NC applications. It should not be allocated to 6-speed Sport models. For imported, modified or previously repaired cars, matching the part number or component style on the part being replaced is recommended.

Other items to consider: Clutch pilot bearing where applicable, clutch master cylinder, clutch slave cylinder, rear crankshaft oil seal, gearbox oil and flywheel condition.

Useful tools / consumables: Clutch alignment tool, suitable socket set, torque wrench, gearbox lifting/support equipment, brake cleaner and suitable clutch spline lubricant where required.

Difficulty guide: DIY Difficulty: Advanced. Clutch replacement requires gearbox removal, correct alignment of the friction disc and correct tightening of all clutch and transmission fasteners.

Why Quinton Hazell? Quinton Hazell is a long-established automotive aftermarket brand, offering dependable replacement parts for servicing and repair. Its components are designed as practical aftermarket replacements for the original parts on the applications listed.

What’s in the box: 1 × clutch friction disc, 1 × clutch pressure plate and 1 × clutch release bearing.

Installation notes: Inspect the flywheel for scoring, cracking, excessive heat damage or wear before fitting the new clutch. Clean all friction surfaces, centre the clutch disc correctly and tighten the pressure plate progressively to the correct specification. Check the clutch hydraulic system while the gearbox is removed.