Quinton Hazell Rear Wheel Bearing Kit • QWB919

Quinton Hazell QWB919 Rear Wheel Bearing Kit

Replacement Quinton Hazell rear wheel bearing kit for Mazda MX-5 MK3/NC and MK3.5/3.75 NC 1.8 and 2.0 petrol models listed in the compatibility table.

The rear wheel bearing supports the rear hub and driveshaft assembly while allowing the wheel to rotate smoothly under vehicle load. QWB919 is designed as an aftermarket replacement for the original bearing on the applications listed.

MazSpec supplies QWB919 as a rear wheel bearing kit complete with a replacement driveshaft lock nut and retaining circlip for installation in the rear knuckle.

Replacement may be required where the original bearing develops rumbling or humming noise, excessive play, roughness when rotated or measurable wheel movement caused by bearing wear.

• Part type: Rear wheel bearing kit
• Location: Rear axle
• Side: Left or right
• Inner diameter: 42 mm
• Outer diameter: 80 mm
• Width: 45 mm
• ABS application: Catalogued for vehicles with ABS
• Quantity per vehicle: 2
• Quantity supplied: 1 wheel bearing kit
• Kit includes: Wheel bearing, driveshaft lock nut and retaining circlip
• Brand: Quinton Hazell
• Part No.: QWB919
• EAN: 5016593285446
• Designed as an aftermarket replacement for the original component on the applications listed

Fitment advice: QWB919 is directly catalogued for the rear axle of Mazda MX-5 NC 1.8 and 2.0 models. The same bearing kit fits either rear side; two kits are required if replacing both rear wheel bearings. For imported, modified or previously repaired cars, matching the part number or component style on the part being replaced is recommended.

Other items to consider: Rear wheel hub, driveshaft components, rear brake discs, rear brake pads and rear suspension bushes.

Useful tools / consumables: Bearing press or suitable removal/installation equipment, hub tools, large socket for the driveshaft nut, torque wrench and appropriate hand tools.

Difficulty guide: DIY Difficulty: Advanced. The bearing must be correctly pressed into the rear knuckle without damaging the bearing or ABS-related components, and the driveshaft nut must be tightened correctly.

Why Quinton Hazell? Quinton Hazell is a long-established automotive aftermarket brand, offering dependable replacement parts for servicing and repair. Its components are designed as practical aftermarket replacements for the original parts on the applications listed.

What’s in the box: 1 × Quinton Hazell QWB919 rear wheel bearing, 1 × replacement driveshaft lock nut and 1 × retaining circlip.

Installation notes: Remove and install the bearing using suitable pressing equipment and support the knuckle correctly during the procedure. Fit the new retaining circlip and driveshaft lock nut supplied with the kit, and tighten all components to the appropriate vehicle specification.