RIDEX Aero Wiper Blades Pair – All MX-5 • 298W0067

RIDEX 298W0067 Aero Wiper Blades Pair – All MX-5

Replacement pair of RIDEX 450 mm / 18-inch flat aero front windscreen wiper blades for Mazda MX-5 Mk1/NA, Mk2/NB, Mk2.5/NB-FL, Mk3/NC and Mk4/ND/RF models.

The wiper blades remove rain, road spray and contamination from the windscreen to maintain clear forward visibility. Their flat aero design uses an integrated spoiler to help maintain consistent contact between the wiping element and the glass as vehicle speed increases.

Quantity: This MazSpec listing supplies two blades, sufficient for both front wiper arms on the confirmed Mazda MX-5 applications. RIDEX manufacturer part number 298W0067 identifies an individual blade, so two identical RIDEX blades make up the MazSpec pair.

MazSpec confirms that the same blade is used on both the driver and passenger sides of the applicable MX-5 models.

Common reasons for replacement include streaking, smearing, juddering, squeaking, missed areas of the windscreen, hardened or split rubber, deteriorated wiping performance or reduced wet-weather visibility.

• Part type: Front windscreen wiper blade
• Blade type: Flat / aero wiper blade
• Styling: Integrated spoiler
• Fitting position: Front
• Length: 450 mm
• Length: 18 inches
• Fastening type: Hook fixing
• Number of adaptors per RIDEX blade: 1
• RIDEX quantity specification: 1 blade per manufacturer SKU
• MazSpec quantity supplied: 2 blades / complete front pair
• Same blade used on driver and passenger sides
• EAN per RIDEX blade: 4059191243648
• Approximate individual blade weight: 0.13–0.166 kg
• Brand: RIDEX
• Part No.: 298W0067

Fitment advice: MazSpec confirms this 450 mm blade across the Mazda MX-5 Mk1/NA, Mk2/NB, Mk3/NC and Mk4/ND/RF ranges. Both front positions use the same blade on the confirmed MX-5 applications. On vehicles fitted with aftermarket wiper arms, compare the existing 450 mm blade length and hook attachment before ordering.

Other items to consider: Check the wiper arms, arm springs, pivots and washer jets while replacing the blades. Poor wiping can also be caused by contamination on the windscreen, weak arm tension or restricted washer jets.

Useful tools / consumables: No specialist tools are normally required. A towel or protective cloth placed over the windscreen is recommended while a blade is removed so that the sprung wiper arm cannot accidentally strike the glass.

Difficulty guide: DIY Difficulty: Easy. Replacement normally involves releasing the existing hook-fit blade, attaching the replacement blade securely and checking that the adaptor has locked correctly.

Why RIDEX? RIDEX wiper blades provide a cost-effective replacement option manufactured to defined blade-length and fastening specifications. The flat aero design incorporates a spoiler to support consistent windscreen contact and effective wiping performance.

What’s in the box: Two RIDEX 450 mm / 18-inch flat aero wiper blades, each corresponding to RIDEX part number 298W0067.

Installation notes: Lift the wiper arm carefully away from the windscreen and protect the glass with a folded cloth. Release the existing blade from the hook fitting and remove it from the arm. Compare the new blade with the original and confirm the attachment arrangement. Engage the adaptor securely with the wiper-arm hook until it locks into place. Repeat on the opposite side, lower both arms gently onto the windscreen and test the wipers with washer fluid to confirm secure retention, smooth travel and full contact with the glass.